Видео

Your old sander is not comparing apples to oranges. I dont rush through anything but sanding.

The ONLY thing I care about in a sander is what can remove material faster. Compared to the 5 inch variable speed DeWalt for under $100, does the festool do anything more? Does it spin significantly faster or vibrate more?

Terrific video, thanks so much.

great job

I love your superviser

Great vid. Thinking about installing one to heat my woodworking shop. Any issues with airborne sawdust affecting the unit?

I think it’s beautiful. I’m actually trying to find one like that to gift to my fiancé who is a LEO.

NICELY DONE!

Hi very nice presentation. As I was watching you cutting plywood with table saw , I did not see any dust. I am wondering what kind of dust extraction you are using. I appreciate your input. Thanks.

Great job. The only thing i would do differently is to ignore the table top pocket holes and fastening. Table top is not going anywhere...plus you can install undermount blocks to avoid movement. But what this does of course is allow for easy transport (as u mentioned) and more importantly, seasonal storage for harsher climates.

Nice work

Sweet

Such a beautiful piece. I have a desk that I picked up cheap that has a similar look without the cabinet. Unfortunately the finish is almost orange. It was built as a two student desk with two large drawers one having a front that drops down with a keyboard wrist rest. I am slowly gathering the tools and skill to make a copy hopefully before I am so old that I no longer use anything beyond a bed. I do not want to refinish my desk I just want a different wood and the satisfaction of the build. I am jealous. Your skill your tools your wife’s desk. Keep the videos coming and I will continue to watch and learn.

Amazing job as usual. I always enjoy watching your supervisor

Great piece, despite the setbacks, good recovery! Waterfall edge turned out really nice. I have a similar setup to yours in the garage and I have contemplated the next (major) tool purchase. Your saw is fine for these projects unless you find it under-powered (I do very occasionally, I just keep the blades sharp). You will go years before you will need a better/bigger planer. Your sanding system is awesome, as is the Domino. So the decision I face comes down to this: If I end up doing a ton of paneled cabinet doors, i will get a drum sander. If I end up making a lot of hardwood tops, I will get a jointer. The jointer will probably win out because it will make my life SO much easier, I can buy nice wood for less $$, and it will improve the quality of even small projects like cutting boards. Keep the great videos coming!

Awesome project

Great video! So many channels on RUclips have a woodworker with a shop full of tools purchased on Craig's List or handed down through generations...and a $1,000+ sanding system. This really makes sense to me since the quality of the sander really DOES make a difference, regardless of skill. I also think the reduced vibration and better ergonomics of a high-end sander become really important in avoiding repetitive stress injury at best, and neuropathy at worst, particularly after hundreds of hours of sanding. Maybe that's just important to us old guys...

Thank you for this helpful video! I have downloaded a PDF of the instructions for the unit I am considering, and found in the "Indoor Unit Installation" instructions in the section MOUNTING PLATE DIMENSIONS, the last line in bold print is: "DO NOT attempt a left rear wall hole." I hope this means they have updated their instructions!

I like the dog never carpenter going whit out a nice doggie he is a very good companion make you day more enjoyable definitely is the best design this week it is perfect 👍👌

Well I been checking for router table and this the best so far good size and good design nothing is missing fence well is good honestly the table have everything to put all the routers bits all in one place perfect perfectly I think I going to copy this one when I going back to Colombia thanks my friend definitely I will copy this table 🙏👌👍🇨🇴

You have to bring your car 🚗 to the car wash after that build

Brilliant work well done the tools are so modern most of mine are over 45 years old I have Subscribed to your site keep the videos coming Good luck from Ireland

Don't use salt it affects the glue

Your using apples and oranges 😕😕😕😕😕😕

Bob Barker. lol

Thank you for making this video. From Bob Barker to your thumbs up friend, this is hugely helpful. After saving enough for the DWE7491RS your plans will make a perfect outfeed bench for my next project.

I like your friend he looks cool guy bring him in the videos

Thank you please read Romans 10:9-13❤

The dolley you had in the background at the start, what is it called, im looking for one just like it.

I'm looking to do similar 600 sq ft Can I get one mounted on inside wall? How to drain? I am at an Airbnb and there is a head unit mounted on inside wall. The drain is what I wondered.

Very nice router table and a great video. Thanks

Excelente trabalho, parabéns 👍🏻

Nice table...not complicated joinery...but I wouldn't use the term 'easy' to describe the project. Loads of specialty tools, jigs, bits and clamps are needed which 95%of DIYer don't have.

I just completed my router table build. Your RUclips was great but more importantly the written directions and diagrams were clear and easy to follow. Thank you!

Come posso contattare X acquistare il mobile in questione

100% super dope. I would go with a darker wood maybe a cherry or walnut. but daum that looks dope. will it work with a phone ? to open the secret compartment?

All those tools and no track saw ? Especially With only a job table saw

Great tips thanks for sharing

Very nice 💕💕

Absolutely great build love the way this turned out love the fact that you can’t tell that it’s a hidden compartment ,like you said with most of them you can tell that they have a hidden compartment in some way. Great job your videos are getting better and better missed Bob Barker in the video.

Hey there! I have to tell you that I’ve been watching your videos from day 1 and the quality of this channel continues to improve with each video. Great job! I do, however, have a question as a fellow woodworker. I hope it isn’t too rude to ask but I am genuinely interested. Why did you decide to invest in expensive Festool machines like the Domino and Miter saw instead of replacing the most commonly used tool in the shop- the table saw? Asking since I went the other way.. Had a period of time where I had maybe 10,000 $ worth of Festool machines and ended up selling most of them (except for the router) and going back to basics like dowels, m&t and half laps.

Very nice

The build is great, the clients choice of color… not a fan especially freshly stained but it’s his table and you seemed to calm it down which turned out much better. I normally hate staining hard woods, and yet I love skateboard colored ply but white oak has such a soft warmth and richness to it I hate to see it covered up. Anyways look forward to more builds

Looks Perfect. Like the stain. Keep on keeping on

Great looking project and love white oak for it. Intending this as advice, not a critique. Please stop apologizing for owning and using a domino. You made the investment and ought to share how it saves time and increases accuracy (or whatever fits) for you.

Did you buy your white oak S2S?

Fun build!

How wide is the final table top? I’m trying to decide between 3 or 3.5 ft wide for my build.

Nice build, but I question the double layer top, and the mitred trim around it. I could understand if the top layer was sacrifial, but pva'ing them together puts paid to that idea. And a close up of the 'trim' shows innacurate cutting of the leg joints. I have no issue with the innacurracy, it's the combining of diy workmanship and OTT extras. Apart from that, I love the basic bench design.

Awesome project!!